The 'Original' damp-proof plastic membrane systems which eliminates dampness, the effects of salts and contaminated backgrounds. Guaranteed for 30 years.

The surface of the membrane has a meshed key permanently manufactured to it, which provides a key for render, plaster, or dab fixing plasterboard.

The dimpled design creates an air gap, which insulates and allows for ventilation, and natural drying of the wall, while providing a dry decorative finish internally.

The air gap can be vented externally via an air vent or internally using the PT-profile strips at the top and bottom of the system.
PLASTER-LATH Easy-to-use Damp-proof system for walls

Fixing
Fixing is by the special polypropylene Plaster-Lath plug at 250mm centres. An area 100mm free of mesh on the Plaster-Lath allows firm and positive overlap jointing.

Dry lining
Dry lining can be fixed to Plaster-Lath by applying adhesive plaster dabs directly onto Plaster-Lath fixings. (See manufacturer's instructions for full guide).

Ventilation
The air gap can be vented externally via an air vent or internally using the PT-profile strips at the top and bottom of the system.

Rendering
Plaster-Lath will accept traditional renders and plaster. All applications are applied in two coats. (See fixing instructions for full guide).

• Damp-proof system for walls
• Provides key for plaster, render or dab fix
• Fast-track application
• Controls damp; salts & contaminated surfaces
• Air gap improves insulation
• Easy to use, easy to handle, just drill & fix