Introduction
Delta Foulmaxx is a range of packaged pump stations
manufactured from ether HDPE or GRP designed
to remove foul and gray water from domestic and
commercial properties where a normal gravity connection
is not possible.
The Delta Foulmaxx is manufactured in accordance with
BS.12056 and BS.752 covering chambers to be mounted
both inside and outside properties. We are also able to
comply with Building Regulations part H if required.
Installation
The Delta Foulmaxx is easily installed in most ground
conditions by simply lowering the chamber into an
excavation with suitable base, making all connections
and backfill with concrete.
Delta have developed a special inlet kit allowing the
installer to cut either 110mm or 160mm on site at the
exact point required. This means that the majority of
chambers can be delivered in one week or less.
|
Scope
of supply
Chambers are available from 580mm to 5m deep and diameters
up to 3 metes.
We are able to supply single and dual chambers with a
range of pumps with vortex and channel impellers.
In standard form we are able to supply pumps to cope with
duties from 2l/s-50l/s and up to a 48m head.
|
Plaster
Lath 
