Construction
The watertight fully flood proof cast iron motor and
the hydraulics section comprise a compact robust unit
construction.
Motor
Three-phase 400 V3- or single-phase 220-240 -V, 50 Hz,
2-pole (2900 min-h-1), insulation class F, protection
type
IP68.
Bearings
The stainless steel rotor shaft is supported in lubricated for-
life ball-bearings.
Shaft seating
Between motor and hydraulic section by means of high
quality mechanical seal, carbon / silicon carbide (V1054
- 1334) and silicon carbide (all others), independent
of
direction of rotation and resistant to temperature shock.
Motor side: oil lubricated lip seal.
Temperature monitoring
TCS-Thermo-Control-System with thermal sensors in the
stator to switch off the pump in the case of over-heating
and switch on automatically after cooling down.
Medium temperature
Max. 400 C continuous use. 600 C intermittent use (max.
5 min).
|
- Simple
cost-effective pump installation
- Vortex
hydraulics for blockage-free pumping in critical applications
- Free
standing or pedestal usage
- Reliable,
quality products
- Mechanical
seat standard
- Excellent
after-sales service and support
- Range
of discharge sizes from G 11/4” to DN 65
- Thermal
sensors as standard to protect motor
|
Plaster
Lath 
