1
|
.....m²
|
DELTA®-GEO-DRAIN Quattro applied to vertical waterproofing (made by Dörken GmbH & Co. KG, D-58311 Herdecke), four-layer protection and drainage system with integrated self-sealing edge, to be delivered and expertly installed on vertical waterproofing. Sheets to be installed and mechanically attached in conformance with the manufacturer's instructions (e.g. with flat-head nails, DELTA®-GEO-DRAIN CLIPs, or wall plugs). Sheet overlaps must be adequate. Overlaps must be covered by a double filter-cloth layer. The filter cloth must face the soil.
|
|
|
2
|
.....lfm
|
100-mm perforated drainage pipe to be delivered and installed in conformance with DIN 4095, Sect. 5.2.2.
|
|
|
3
|
.....lfm
|
B 32 grain size gravel to be delivered and filled in as a drainrock bed.
|
|
|
4
|
.....lfm
|
DELTA®-NOPPENBAHNEN-PROFILtobe
delivered and installed after backfilling to protect the upper edge of the sheeting.
|
|
|
5
|
.....m²
|
DELTA®-GEO-DRAIN Quattro applied to
horizontal waterproofing (made by
Dörken GmbH & Co. KG, D-58311 Herdecke), four-layer protection and drainage system with integrated self-sealing edge, to be delivered and expertly installed on a horizontal waterproofing layer. Building height: ...m above ground. Install in conformance with the manufacturer's instructions. Sheet overlaps must be adequate. Overlap areas must be covered by double layer of filter cloth. The filter cloth must face the soil.
|
|
|