Delta Drain    Plaster Lath   Delta MS500    Delta Geo Drain Quattro    Delta PT    Delta FM    Delta MS20 Company Video
 

 

 

 

The fast-track damp-proof system guaranteed for 30 years

PLASTER-LATH

Technical Data
SIZE supplied in rolls
1.5m x 10m (15m2
WEIGHT 8.5kg per roll
DEPTH < 8mm
RESISTANCE TO 80kN/m2
COMPRESSION
TENSILE STRENGTH 600N/60mm
ELASTICITY 60% (approx)
TEMPERATURE Thermal resistance for
RESISTANCE 105mm outer leaf at
2.7% v/V moisture
content is:
0.105 = 0.072mm2K/W 1.485
STANDARD Plaster-Lath+
U-VALUES plaster+105mm brick
wall 2.25W/m2K
Plaster-Lath+
Plaster+220mm brick
wall 1.72W/m2K
HEALTH & SAFETY No health hazard
Specification guide
JOINTING Plaster-Lath to be
lap jointed either
horizontally or
vertically allowing
100mm overlap.
FIXING At 250mm internally
and 150mm
externally (maximum)
Vertical and horizontal
centres by Plaster-Lath
Plugs, following
manufacturer's
instructions.
PLASTERING* In accordance with
BS5492
RENDERING* In accordance with
BS5262
DECORATION Renderings to be
thoroughly dry before
Painting or application of wallpapers etc.
* Refer to manufacturer's instructions
for specific plasters and renders.
Guarantee
Plaster-Lath is guaranteed against deterioration for a period of 30 years on condition that is has been fixed and finished in accordance with the manufacturer's instructions. Delta MS Ltd cannot be held responsible for the performance of plasters, renders or other finishes.

The 'Original' damp-proof plastic membrane systems which eliminates dampness, the effects of salts and contaminated backgrounds. Guaranteed for 30 years.
The surface of the membrane has a meshed key permanently manufactured to it, which provides a key for render, plaster, or dab fixing plasterboard.
The dimpled design creates an air gap, which insulates and allows for ventilation, and natural drying of the wall, while providing a dry decorative finish internally.
The air gap can be vented externally via an air vent or internally using the PT-profile strips at the top and bottom of the system.


Roll size: 1.5 x 10 metre (15m2)





Available from:

 

 

 

DELTA Membrane Systems Ltd
Bassett Business Centre,
Hurricane Way,
North Weald, Epping,
Essex,
CM16 6AA
Tel: 01992 523 811
Fax: 01992 524 046
email: info@deltamembranes.com
Website: www.deltamembranes.com