DELTA dimpled sheetings are produced, tested and conform to the following standards:
► DIN 4095
► BOCA
► DIN 18 195
► BMEC
► BS8102; 1990
► CCMA
► DIN 53 576
► DTU 2011
► BBA 00/3742
► DIN 53 576
► ÖNORM B 2209
► BCA DESIGN GUIDE
► SITAC (DELTA®-MS)
DELTA®-MS:
Dimpled sheeting for the protection of foundation wall waterproofing against mechanical damage.
For use In civil engineering as a seepage layer In double-skinned constructions
Material:
high density polyethylene
Thickness:
approx. 0,6 mm
Stud height:
approx. 8 mm
Roll size:
3,0 x 20 m
(With flat edge of 7 cm on one side)
2,4 x 20 m
2,0 x 20 m
1,5 x 20 m
1,0 x 20 m
Compressive strength:
> 250 kN/m2
Crushing under pressure:
see diagram on page 16
Drainage capacity:
approx. 2,25 l1/3 - m
approx. 135 l/min - m
approx. 8 100 l/h - m
see also diagram on page 17
Air volume between studs:
approx. 5,3 l/m2
Temperature resistance:
-30°C to + 80°C
Chemical properties:
resistant to chemicals, resistant to root penetration. rotproof, neutral towards drinking water
Behaviour In fire:
B2 accord, to DIN 4102, In the case of special requirements possibly B1 accord, to DIN 4102
(test mark PA III 2.2087)
DELTA®-MS: Dimpled sheeting with particularly high drainage capacity and compressive strength, suitable for high performance seepage layers In building and civil engineering construction
Material:
high density polyethylene
Thickness:
approx. 1 mm
Stud height:
approx. 20 mm
Roll size:
2,0 x 20 m
In the case of special requirements,
also available In board format
Compressive strength:
approx. 150 kN/m2
Crushing under pressure:
see diagram on page 16
Drainage capacity:
approx. 10 l/s - m
approx. 600 l/min - m
approx. 36 000 l/h - m
see also diagram on page 17
Air volume between studs:
approx. 14 l/m2
Temperature resistance:
-30°C to + 80°C
Chemical properties:
resistant to chemicals, resistant to root penetration, rotproof, neutral towards drinking water
Behaviour In fire:
B2 accord. to DIN 4102,
in the case of special requirements
possibly B1 accord. to DIN 4102
DELTA'-MS 20 perforated:
Dimpled sheeting with high drainage capacity for horizontal use on roof slabs, such as slabs over car parking and for roof landscaping. The porosity makes the dimpled sheeting pervious over the whole area providing uniform drainage of water
Technical data as for DELTA-MS 20, with following differences:
Thickness:
approx. 0,8 mm
Roll size:
2,0 x 20 m
also available In board format
1,0 x 1,2 m
Plaster
Lath 
