DELTA®-DRAIN: DELTA®-DRAIN: Double dimpled sheeting with integral geotextile for the protection of foundation wall waterproofing against mechanical damage and for reliable drainage of stratified water and slope water. Installation depth up to 5m.
Material:
high density polyethylene
Material of filter mat:
polypropylene
Stud height:
approx. 12 mm
Roll size:
2,0 x 12,5 m
1,5 x 12,5 m
Compressive strength:
approx. 90 kN/m2
Crushing under pressure:
see diagram on page 16
Drainage capacity:
approx. 1,2 l/s - m
approx. 72 l/min - m
approx. 4.320 l/h - m
see also diagram on page 17
Void between studs:
approx. 6 l/m2 each side
Water porosity value of filter mat:
6,3 x 10e-4 m/s
Permitivity of filter mat:
1,88 s-¹
Effective pore diameter of filter mat:
D = 180 µm
Temperature resistance:
-30°C to + 80°C
Chemical properties:
resistant to root penetration, rotproof.
Behaviour in fire:
B2 accord, to DIN 4102
DELTA®-PT:
Dimpled sheeting with plastic mesh welded on, suitable as a damp-proof base for plaster or shotcrete, e.g., as a seepage layer in tunnel construction, or for repairing basements internally
Material:
high density polyethylene
Thickness:
approx. 0,5 mm
Stud height:
approx. 8 mm
Roll size:
2,0 x 20 m
Compressive strength:
approx. 70 kN/m2
Drainage capacity:
approx. 5 l/s - m
approx. 300 l/min - m
approx. 18 000 l/h - m
Void between studs:
approx. 5,5 l/m2
Temperature resistance:
-30°C to + 80°C
Chemical properties:
resistant to chemicals, resistant to root penetration, rotproof, neutral towards drinking water
Behaviour in fire:
B2 accord. to DIN 4102
DELTA®-GEO-DRAIN:
Dimpled sheeting with integral separating membrane and welded-on geotextile as a compact protection and drainage system for elastic thick layer waterproofing in building construction. Installation depth up to 10 m.
Material:
high density polyethylene
Material of geotextile:
polypropylene
Material of separating membrane:
polyethylene
Stud height:
approx. 9 mm
Roll size:
2,0 x 12,5 m
Compressive strength:
approx. 400 kN/m2
Crushing under pressure:
see diagram on page 16
Drainage capacity:
approx. 3,5 l/s - m
approx. 210 l/min - m
approx. 12 600 l/h - m
see also diagram on page 17
Void between studs:
approx. 7,9 l/m2
Temperature resistance:
-30°C to + 80°C
Chemical properties:
resistant to root penetration, rotproof, neutral towards drinking water
Behaviour in fire:
B2 accord. to DIN 4102
DELTA®-GEO-DRAIN TP:
Technical data as for DELTA®-GEO-DRAIN, the applications vary.
Dimpled sheeting with integral geotextile and high compressive strength, suitable for installation at depths up to 10 m, as drainage and protection layer in civil engineering and underground structures with high water volumes
Plaster
Lath 
