Koster Injection Gel 4 is a low viscosity acrylic gel for curtain injection and injection into masonry.
Suitable for waterproofing belowground construction elements on the outside by curtain injection. For injection into full brick masonry in order to seal the mortar joints against water ingress. Can be applied in special waterproofing projects, like tunnels, shafts and void injections.
This water based, elastic acrylic gel has a very low starting viscosity after initial mixing. It is capable to bind water during the gelation. The swelling ability after full curing allows a 10% intake of additional water into the gel structure. Due to the low starting viscosity it can be injected into fine substrate pores.
Koster Injection Gel G4 is injected using a 2-component-injection pump with an integrated water flush, e. g. the Koster Acrylic Gel Pump. Before application the delivered concentrate needs to be diluted to approximately the double amount using local tap water.
This unique injection gel ready mixed components have a pot life of 24 hours.
Always wear protective clothing, gloves and safety goggles during the processing and application of Koster Injection Gel G4.
When installing do not stand directly behind the packer.
Clean the pump/machinery immediately after use with clean water.
