Bespoke Pump Chambers

Pump Chambers

Overview
The 800mm x 1300mm deep range of chambers are typically used where inverts are required to be deeper than the standard Delta Dual V3, V4 & V6 & Foul V3 (345mm from cover level). For example in buildings where drainage runs are long or drainage is running below floor slabs 250mm or thicker. Inverts can be up to 775mm from top of structural slab.

These chambers can collect ground, foul or surface water, dependent on the pump used, but not in the same chamber.

800 Series pump chambers

  • bespoke sump pumpAvailable in depths of 800mm, 1000m, 1300mm, 1500mm, 1800mm, 2000mm from stock
  • Applications including ground, surface & foul water
  • Accepts single & dual, guide rail or free standing 32mm, 50mm & 65mm pumps
  • Inlets can be cut to suit with kit provided
  • Designed for applications where high hydrostatic pressures are present
  • Dedicated position for cable duct & vent
  • Manufactured from tank grade ICO 1314 virgin polyethelene
  • Accepts standard 450mm x 600mm covers or larger

1160 Series pump chambers

  • bespoke 1160x1940Available in depths 1140mm, 1540mm, 1940mm, 2630mm from stock (3000-5000mm to special order)
  • Applications including ground, surface & foul water
  • Accepts single & dual, guide rail or free standing 32mm, 50mm & 65mm pumps
  • Pre installed 110mm & 160mm bosses for inlets
  • Additional inlets can be cut to suit with kit provided
  • Designed for applications where high hydrostatic pressures are present
  • 110mm bosses for cable duct & vent
  • Manufactured from tank grade ICO 1314 virgin polyethelene
  • Accepts standard 600mm x 600mm covers or larger

View Site Photo

View Brochure

If you'd like more information on any of our products, call 01992 523 523 today to speak to one of our experts